4mm 5mm 6mm 8mm 10mm 12mm Euro Grey Tempered Glass

Enhanced Strength

• Superior Safety

  
  

  The primary safety benefit of tempered glass is that it breaks differently than standard annealed glass. When tempered Euro Grey glass experiences enough force to fracture, it doesn't shatter into long, jagged shards. Instead, it breaks into thousands of small, relatively blunt, granular fragments.

  
  

  Why is this Safer? These fragments are less likely to cause severe cuts, lacerations, or impalement injuries. This is a fundamental safety advantage, critical in any application where human contact is possible.

  
  

  How Safety Remains Consistent Across Thicknesses (4mm - 12mm):

  
  

  The tempering process applies the same principles regardless of the glass's thickness. The rapid cooling and resulting internal stress profile is consistent.

  
  

  Therefore, all thicknesses benefit from this controlled fragmentation.

  
  

  Here's a breakdown of how safety and resistance to breakage work across the range:

  
  

  Increased Strength: Tempering increases the strength of the glass across all thicknesses. The glass is significantly stronger than annealed glass of the same thickness against the following:

  Impact: Making it more resistant to forces.

  Bending: increasing its durability.

  Temperature changes: Reducing the likelihood of breakage as the glass expands or contracts.

  Consistent Fragmentation Pattern: The failure mode will always be the same, regardless of thickness: small, granular fragments.

  
  

  Important Considerations Regarding Thicknesses:

  
  

  While the fundamental safety principle of fragmentation remains consistent, thicker glass offers enhanced performance in several ways:

  
  

  Increased Impact Resistance: Thicker glass is inherently stronger and can withstand greater impact forces before breaking.

  Increased Load-Bearing Capacity: Thicker glass can be used in applications requiring it to support weight or structural loads.

  Sound Dampening: The thickness can help with noise reduction where sound control is needed.

  Breakdown by Thickness & Application (Reinforced):

  
  

  4mm & 5mm: Ideal for applications where a balance of safety, aesthetic, and weight are important. Typically used where the primary concern is human safety (e.g., picture frames, shower doors).

  6mm: A popular choice, because it delivers a high level of strength and provides better protection against impacts.

  8mm, 10mm, and 12mm: Used in high-traffic environments and those where structural integrity and resistance to damage are essential (e.g. balustrades, commercial doors, and structural glazing).

  
  

  Important Points to Remember:

  
  

  All Tempered Euro Grey glass offers superior safety over annealed glass.

  Thicker glass offers greater strength, higher impact resistance, and improved performance in load-bearing applications.

  Tempered glass cannot be cut or drilled after the tempering process.

  
  

  In summary, the superior safety of Euro Grey Tempered Glass is inherent to the tempering process and applies across the specified thicknesses. The primary goal is the controlled fragmentation into small, less dangerous pieces, making the glass a safe essential for diverse applications.

Advantages